ETRS. 5X Advanced Broniew technologies for new imaging horizons! UUUUU. RIBES. LETTO m. El triu. BINIA BRONICA. ETRO. SORER. ZENZA BRONICA. the Zenza Bronica ETRS and is between the lens leaf shutter type single lens reflex Although the following instructions are based on the standard ETRSi. Congratulations on your choice of the Zenza Bronica ETRS (or ETRC) this instruction manual carefully, before you even touch the camera. However, if your .
|Published (Last):||21 March 2016|
|PDF File Size:||12.18 Mb|
|ePub File Size:||11.59 Mb|
|Price:||Free* [*Free Regsitration Required]|
Zenza Bronica ETRS User Manual
Unfold the manual film winder on the right side of the film holder and rotate in the arrow-indicated direction, while checking the advancing film. Their main competing camera at the time was the Mamiya M Film Type Indicator Frame When loading roll film in it’s exclusive film back, do not mistake the dotted line for the starting point, as it is located before the arrow marks. Supplied with roll film back.
Focusing Adjustments The lens is focused on the subject, by rotating the focusing ring in either direction, while checking The shutter is not cocked. A revision of the ETRS was made, that replace the body to a newer plastic shell. Insert a new battery or keep a spare on hand, for such occasions. The camera will release the back when the dark slide is inserted and the release button on the body is pressed.
Manula central split-image spot splits the image diagonally, with the upper and lower halves being separated diagonally when the lens is out of focus. Interchanging Focusing Screens The roll film holders have been changed to a two release tab system.
Interchanging Focusing Screens A. Table of Contents Add to my manuals Add. The shutter button lock has been redesigned. First, cock the shutter with the film winding crank and then shift the time exposure lever to the left looking from the body towards the lenswhich will expose a red-colored “T” on the barrel.
Depth of Field Tables F-num- Meters bers oo 10 5 3 2 1. This page has been accessedtimes. Align “A” AE dial to index broniva. Distance scales on the Bronica lenses for the ETR can be used for setting the bronjca on the required distance or finding the distance actually focused.
Nronica the cocking pins are not at the position of the green dot, the cocking pin of the lens can be set to the position by simply moving it with the finger.
Remove the film holder and, while preventing the loose film from unwinding, take out the take-up spool. On the other hand, short, rapid strokes, up to an accumulated full rotation, will also do the job Time T Exposure Time exposures are made with the time exposure lever on the lens, regardless of the setting on the shutter speed scale.
The shutter speed dial can be freely rotated in either direction. The inserts all have a automatic resetting exposure counter with a winder.
However, den pressing the depth of field preview lever will stop the lens diaphragm down to the preselected lens opening aperturepermitting the photographer to check the depth of field effect on the focusing screen. Depress the shutter release button with the ball of the finger. While mid-roll film format changes are not possible, end of roll changes are just as quick with additional inserts. Finally, lift it up by the lever. When using Class M and Class F flash bulbs, they will synchronize at the shutter speed settings indicated in the above table.
The ETR was released in and is Bronica’s first leaf shutter based camera system. Page of 31 Go. Filter size 58mm diameter thread mount on 75mm lens; 62mm diameter thread mount on lenses from 40mm to mm focal lengths. The depth of field scale shows the zone of apparent sharpness at any lens opening or distance and can be utilized for quickly and simply ascertaining the depth of field.
Film roll film 15 exposures ; There is no B bulb setting on the shutter speed dial. The Bronica ETR is a series of medium format 4. When the shutter is charged or cocked, both cocking pins of lens and body are set to the green colored dot.
Bronica ETR-Si Instruction Manual
The film back holder EI has been improved with locking dark slide system similar to the older 6×6 Bronicas. Then move the cover opposite to the arrow-indicated direction until it locks.
These identical pairs of apertures indicate the distance that will be in focus at these lens openings. Pushing the back cover opening button inwards in the arrow indicated direction opens the back cover and permits the film holder to be detached. Seal the exposed film and return it to its original box until development. These include the multi-exposure lever, mirror lock-up lever and the winder cover . Contents 1 ETR 1.
Then, drop the rear end of focusing screen and slide the screen removal lever to the right. Simply shift the film back up slightly and pull it away.
Bronica ETR-Si Instruction Manual – Page 1 of 31 |
Got it, continue to print. The same is the case with extension tubes and bellows.
When set in this manner, the shutter can be released and cocked any number of times, without advancing the film. The lower half of the body has improved grip areas.
Press all the way If the green-colored battery check lamp lights up when the battery check button is depressed, the battery is loaded properly egr there is sufficient power for electronically-con trolled operations.